男女做爰高清免费aaa_岁人妻丰满熟妇α无码区_大杳蕉狼人欧美_亚洲精品久久久久午夜福禁果tⅴ_97人妻碰碰碰无码视频_产后漂亮奶水人妻无码_人人爽人人添人人欧美一区_国产青春草在线观看视频_千金被调教室跪趴sm麻豆 _国产精品无码一区二区三区在

The hazardous waste incineration flue gas wet electrostatic precipitator has been delivered to Liaoning. This equipment can handle a gas volume of 40,000 m³/h, with the gas temperature not exceeding 80℃. The equipment operates under positive pressure and the designed pressure is less than 5000 Pa.

The hazardous waste incineration flue gas wet electrostatic precipitator has been delivered to Liaoning

The wet electrostatic precipitator for zinc smelting tail gas treatment by Weimei Environmental Protection was recently shipped to Ningxia. This demister is a treatment equipment for high-humidity and highly corrosive tail gas.

Zinc Smelting Tail Gas Treatment Wet Electrostatic Precipitator Project

The flue gas handling capacity of this equipment is ≤ 30,000 m³/h, the flue gas temperature is ≤ 80℃, and the flue gas is derived from a molten zinc furnace. Its mist removal efficiency is > 90%, and the equipment operates under negative pressure with a running pressure of -5000 Pa.

The wet electrostatic precipitator for zinc smelting tail gas treatment is loaded and ready to depart.

This wet electrostatic precipitator (WESP) processes flue gas that has been purified by a secondary desulfurization tower. The design operating temperature is 60°C, with a maximum instantaneous operating temperature of 80°C. It employs intermittent spray water washing for cleaning.
 

The tail gas treatment requirements are:
Dust emission concentration at the outlet ≤ 10 mg/Nm³
Dust removal efficiency ≥ 90%

The WESP shell is constructed from 316L stainless steel, which provides enhanced temperature and corrosion resistance.

The outer shell of the wet electrostatic precipitator is made of corrosion-resistant 316L stainless steel.

The anode tubes of the wet electrostatic precipitator are made of flame-retardant vinyl fiberglass reinforced plastic (FRP).

The Ningxia Hydrocyanic Acid Tail Gas Treatment Wet Electrostatic Precipitator Project

The wet electrostatic precipitator, made of 2205 material and designed for flue gas treatment at the front-end of the yellow phosphorus furnace, has been officially put into operation.

wet electrostatic precipitator, made of 2205 material,has been officially put into operation.

The flue gas handling capacity of this equipment is ≤ 80,000 m³/h, the flue gas temperature is ≤ 90℃, the working pressure is ≤ 7,000 Pa, and the designed flow velocity of the demister is ≤ 1 m/s. Since the flue gas is from the front-end of the yellow phosphorus furnace and contains highly corrosive media such as sulfur, phosphorus, arsenic and fluorine, the anode tubes, upper shell, middle shell and lower shell of the wet electrostatic precipitator are all made of 2205 duplex stainless steel. With its excellent impact toughness and outstanding overall and local corrosion resistance, it ensures the stable operation of the entire equipment system.

The wet electrostatic precipitator has been delivered to the customer and put into use (visually smokeless).

The medium treated by this wet electrostatic precipitator(WESP) is desulfurization flue gas, which contains highly corrosive substances such as sulfur, phosphorus, arsenic and fluorine. The operating temperature is ≤ 60℃, and the operating pressure is within 6,000 Pa.

The wet electrostatic precipitator for desulfurization tail gas with a 200,000 m³/h flue gas handling capacity has been put into operation (visually smokeless).

The anode tubes of the wet electrostatic precipitator are made of conductive fiberglass reinforced plastic (FRP), with a wall thickness of 3 mm. The resin adopted is flame-retardant vinyl ester resin, and the inner surface is smooth and clean for easy flushing. The resistance of each anode tube is less than 100 Ω. The main beams, secondary beams and cathode wires are made of 2205 duplex stainless steel. The counterweights are made of high-temperature and corrosion-resistant ceramic material.

  近日，一臺50w氣量黃磷渣汽濕式靜電除霧器順利完成調試，交付客戶使用??！該設備采用濕式靜電除霧（除塵）技術處理黃磷渣尾氣，助力客戶實現環保達標與優化生產。感謝團隊的努力與客戶的信任，我們將持續提供更加優質的服務！！

50w氣量黃磷渣汽濕式靜電除霧器調試前后對比

   50w氣量濕式靜電除霧器介質是水淬黃磷爐渣產生的渣汽。含有硫、磷、砷、氟等強腐蝕性物質，工作溫度≤60℃，工作壓力在6000Pa以內。

  黃磷尾氣100t/h高溫高壓燃氣鍋爐（540℃，9.8MPa）煙氣預處理裝置布袋除霧器

     該裝置采用碳酸鈉（Na₂CO₃）為煙氣處理劑，除霧采用布袋除霧器。煙氣預處理裝置由原料倉、投料系統、混合干燥系統、布袋除霧器等四部分組成。本項目煙氣中的硫份、磷份以及其他酸性物質含量較高，煙氣預處理裝置需要充分考慮硫份、磷份以及其他酸性物質的腐蝕問題，煙氣預處理裝置中的煙道全部采用不低于2205、316L材料。

黃磷尾氣綜合利用預處理裝置布袋除霧器（1760袋）穩定運行

煙氣預處理裝置由原料倉、投料系統、混合干燥系統、布袋除霧器等四部分組成

黃磷尾氣經煤氣凈化過濾器處理，進入氣柜，再經脫硫裝置凈化后進入黃磷尾氣發電系統100t/h鍋爐燃燒，燃燒產生的廢氣經煙氣預處理裝置+布袋除霧器+“濕法脫硫+靜電除霧器”進行處理，SO₂、NO₂和顆粒物可達到《火電廠大氣污染物排放標準》（GB 13223-2011）表1中相關限值，P₂O₅達到《貴州省環境污染物排放標準》（DB52/864-2022）表2中相關限值，最終由現有的50m高排氣筒排放。

  一臺氫氰酸尾氣治理濕式靜電除霧器正在加緊制作中，該濕式靜電濕霧器煙氣流量85000Nm³/h，入口煙氣溫度60℃-80℃，入口煙氣壓力500Pa。

氫氰酸尾氣治理優化不銹鋼氣室制作

   該除霧器入口煙氣為由二級脫硫塔凈化后的煙氣，設計工況60℃，瞬時最高工況80℃，采用間歇噴淋水沖洗。尾氣治理要求出口粉塵排放濃度≤10mg/Nm³；除塵效率≥90%。

氫氰酸尾氣治理濕式靜電除霧器陽極管制作

  2205雙相鈉次磷酸鈉尾氣治理濕式靜電除霧器調試運行，該除霧器陽極管選用性能優良的2205雙相鋼材質，陽極管呈正六邊形，內切圓φ360*6000mm，厚度2mm，2205雙相鋼管材具有優良的力學性能，而且耐腐蝕。

次磷酸鈉尾氣治理濕式靜電除霧器調試運行

  目前，由我司設計制作的氰尿酸煙氣凈化濕式靜電除霧器已完成安裝，即將進入調試階段，該設備專為氰尿酸生產行業量身定制。該設備采用濕式靜電除霧技術，可有效解決氰尿酸生產過程中產生的酸性煙氣、粉塵及氣溶膠等污染物，助力企業實現達標排放。

   濕式靜電除霧器適用于氰尿酸、化肥等化工行業的尾氣深度治理，目前，該設備進入最后的調試準備階段，威美環保技術團隊將全程保障系統安全穩定的運行。